A hub for Mark Weber’s musical work and updates.

Dark, moody horizontal band of soft clay-model shapes in deep charcoal and muted teal, evoking an abstract studio scene at dusk.

Turning Melbourne Showers Into a Recorded Instrument

For years, I treated rain as background atmosphere in my music: a wash of noise placed beneath a guitar, softened until it became almost abstract. Then I began wondering whether rain could perform a more active role. The process behind how I used a field recorder to capture the sound of rain for a track started with a simple idea: build the song around real weather instead of imitating it with a preset.

The project grew from a sparse, melancholy piece I had been writing in my home studio. It needed movement and a sense of place, but the obvious treatments felt synthetic. I wanted the hiss, irregular droplets and distant rumble to influence the arrangement, giving the finished track a texture that could not have been created from stock samples alone.

My recording setup was modest: a Zoom field recorder, a matched pair of small-diaphragm condenser microphones and a simple windshield. Before taking the gear outside, I practised in the studio by recording the shower in my bathroom and the rain striking different surfaces around the house. Those trials taught me more about placement than any microphone manual did.

Melbourne’s changeable weather gave me the opportunity. A cold front can send a sharp shower across the city in minutes, even when the forecast looks unremarkable. I chose a narrow laneway in Brunswick, where the sound could move between brick walls, metal pipes and an old corrugated awning without turning into a harsh roar.

Choosing a Useful Place to Listen

The location needed shelter from the wind but also an open acoustic connection to the rain. Standing beneath a narrow verandah gave me a dry recorder position and a mic that could extend beyond the edge of the roof. This produced two distinct perspectives: the sheltered microphone heard softer, rounded patter, while the exposed edge caught sharper impacts and droplets.

I kept the microphone stands well away from gutters and drainpipes. Their resonant rushing sounds can be effective, but placing the microphones directly beneath them creates an exaggerated roar that quickly dominates a recording. The same applied to windows, which can introduce reflections and traffic noise. The goal was to capture the character of the rain, not merely the highest possible level.

Different microphone arrangements offered useful compromises:

Recording setup What it captures well Main limitation My use
XY stereo Focused, strongly correlated sound Limited spatial spread and poor rear coverage Main downpour and distant weather
ORTF or spaced stereo pair Wide ambience with natural depth Less precise mono compatibility Verandah and street perspectives
Shotgun microphone Isolated detail from a distance Can miss the broad character of rain Roof, gutter and window textures
Binaural microphones Natural headphone perspective Vulnerable to wind and handling noise Intimate droplet and rustle sounds

For the principal take, I used a spaced pair angled outwards. It created a convincing sense of width while retaining enough overlap between channels for a stable mono mix. The shotgun microphone handled individual surfaces, and the binaural pair added close, headphone-friendly details later in the production.

Building a Rain-Safe Recording Kit

The recorder itself was never exposed to precipitation. I placed it inside a sealed pouch, with the microphone cables entering through a narrow opening protected by foam. The windshield covered the microphones, although I avoided wrapping them so heavily that the wind protection also removed the fine, glassy texture of light rain.

Protection required balance. A bare microphone gathered a beautifully detailed hiss, but even a modest breeze introduced low-frequency movement and distorted the noise floor. A double layer of foam and mesh gave me a cleaner recording without erasing every transient. I also switched off automatic gain control so the recorder did not react to sudden downpours by reducing their level.

I recorded at 96 kHz and 24-bit, keeping the peak level around minus 12 dBFS whenever possible. The extra sample rate was not essential for every sound, but it gave me clean material for detailed textural work. Headphones helped me identify unwanted handling noise, traffic and distant voices before they became permanent parts of the take.

Every rain session included several minutes of “dry” ambience from the same position. That reference revealed unwanted hum, electrical buzz and the low rumble of passing vehicles. When the storm became loud, I also stopped to check the equipment rather than trusting the recorder’s display alone.

Capturing Several Kinds of Rain

The most useful material came from treating each surface as a separate instrument. A corrugated roof offered a broad metallic patter; a canvas awning produced a softer, almost textile rustle; the edge of a metal verandah gave sharp rhythmic ticks. I recorded each from several distances and angles, moving only when the rain was steady enough for me to work safely.

I avoided climbing onto anything wet. The sounds could be captured from ground level, through an open doorway or with the microphone placed on a pole beneath a safe overhang. If thunder rolled across the sky, I packed the equipment away. A field recorder is useful, but it is not worth risking injury or damage to the microphones.

Melbourne squalls rolling in from Port Phillip Bay often arrive with strong, shifting wind, so those recordings became lessons in restraint. I used them for short bursts rather than the foundation of the track. By comparison, a Sydney collaborator sent clips recorded beside a balcony during a coastal shower, where the softer patter revealed the damp air and distant road traffic. Brisbane supplied the opposite extreme, with subtropical rainfall that arrived heavily enough to produce a dense, hissing canopy.

These recordings shared a basic acoustic profile but lacked the same sonic identity. The Melbourne clips had hard urban reflections and the mechanical rhythm of verandah chains. Sydney brought a more spacious coastal softness, while the Brisbane downpour felt broader and more relentless. Keeping those distinctions intact made the final track feel recorded in a real place rather than assembled from interchangeable weather sounds.

Editing the Weather Into Focus

Once home, I imported every take with its location, microphone position and surface noted. A slow pass through the files exposed the strongest moments: a sudden sequence of droplets, a clean wash of distant rain and several metallic downbeats created by expanding verandah roofing. The original recordings remained untouched, while useful fragments became separate layers.

Light cleanup made a larger difference than aggressive noise reduction. I removed persistent hum, isolated clicks and the occasional gust that spoiled an otherwise clean section. High frequencies above the rain’s natural range were tamed gently, while short fades preserved the soft beginnings and endings that made the sounds feel spontaneous. The rough sequence and production notes are available through the Mark Weber Music Blog.

I also created transformations without making the source obvious. Reversing a short rainfall passage produced a convincing inward motion, while time-stretching the smoothest hiss created a slow atmospheric swell. A few impacts were layered at different volumes to suggest changing intensity, but I resisted constructing a dramatic storm from fragments that did not belong together.

Letting the Rain Shape the Arrangement

The track eventually settled into a 6/8 rhythm at 92 beats per minute. I wrote the guitar part after hearing the field recordings, allowing a sequence of roof impacts to determine the accents. The rain did not simply follow the composition; it became the material from which the composition emerged.

Warm analogue-style chords sat underneath the weather, while a restrained electronic pulse supplied forward movement. In the verses, I kept the rain spacious and distant. During the choruses, the close microphone textures came forward and the rhythm became more insistent. This gave the weather a narrative function rather than making it a permanent background layer.

I first shared the developing arrangement with other musicians at the Melbourne Music Market, where independent acts gather around trestle tables and folding stands. The enclosed room changed how the rain appeared on the small playback system, so I adjusted the low end before presenting the final version. Hearing the track in that less-than-ideal environment was useful: it exposed frequencies that had felt essential in headphones but mattered little on a modest speaker.

Balancing Natural Detail and Playability

The balance was primarily about restraint. Rain can contain impressive peaks, and compressing the material until every moment felt loud removed the dramatic pauses between heavier passages. I used compression more as a safety net than as a way to increase the apparent intensity of the storm.

Spatial depth mattered just as much as volume. Wide stereo recordings established the exterior environment, while mono-compatible layers carried the essential patter. I checked the track with headphones, a studio monitor and a phone speaker because a convincing headphone mix can disappear on an ordinary Australian kitchen radio or car stereo.

The final mix left room for the rain to feel unpredictable. Some sections were nearly dry; others placed a close droplet directly against the beat. I preserved small imperfections, including uneven gusts and irregular spacing between impacts. Those details separated the sound from a perfectly looped texture and gave it the character of an actual downpour.

A Repeatable Practice for Future Sessions

The first attempt involved more equipment than I needed and fewer microphone positions than I wanted. Since then, I have reduced the kit to one recorder, one stereo pair, a shotgun and a binaural pair. The simple checklist is now weather forecast, safe access, several surfaces, multiple perspectives and enough dry reference recording to reveal the noise floor.

File management became just as important as microphone technique. I name each clip by city, surface, perspective and take number, then save the unedited recording before creating any processed version. That habit took extra discipline, but it prevented a dramatic reverse from being mistaken for the original performance and made comparisons between takes far easier.

The practical takeaway is to capture rain as a set of distinct acoustic events, protect the recorder without smothering the microphones, and preserve the irregular space between sounds. Real weather becomes convincing when the texture, place and movement remain believable rather than being polished into a seamless loop.